upsd.conf
per admin
—
darrera modificació
2020-03-25T16:35:18+02:00
#
# This file contains access control data, you should keep it secure.
#
# It should only be readable by the user that upsd becomes. See the FAQ.
# =======================================================================
# Access Control Lists (ACLs)
#
# ACL
# ACL myhost 10.0.0.1/32
#
# ACCEPT [...]
# REJECT [...]
#
# Define lists of hosts or networks with ACL definitions.
#
# ACCEPT and REJECT use ACL definitions to control whether a host is
# allowed to connect to upsd.
#
# This default configuration only gives access to localhost. To allow
# other hosts or networks to connect, see the documentation and change
# these lines.
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32
ACCEPT localhost
REJECT all
# =======================================================================
# MAXAGE
# MAXAGE 15
#
# This defaults to 15 seconds. After a UPS driver has stopped updating
# the data for this many seconds, upsd marks it stale and stops making
# that information available to clients. After all, the only thing worse
# than no data is bad data.
#
# You should only use this if your driver has difficulties keeping
# the data fresh within the normal 15 second interval. Watch the syslog
# for notifications from upsd about staleness.